Promotion : MetroBlazer MB1210S+ Managed Gigabit switch, 8 x 1G RJ45 ports, 2 x 1G SFP slots, FREE Transceiver

The MetroBlazer MB1210S+ CPE Switch provides 8 x 1Gbps RJ45 ports and 2 x SFP slots for expanding its flexibility in fiber connection. It is a compact and feature rich Ethernet switch that is suitable for businesses of various sizes who require high speed connection with superior manageability.

Built-in powerful management functions, including port mirroring, link aggregation, VLAN, user authentication, spanning tree, port rate limit, MAC address binding and event log through SNMP/Telnet/HTTP interface, network administrators will find its functions comparable to those high priced mid range Ethernet switches.

 

Standards	IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3z, IEEE802.1D, IEEE802.1w, IEEE802.1P, IEEE802.1Q, IEEE802.1x
Switching capacity	8 x RJ-45 10/100/1000Mbps ports
	2 x SFP shared with port 9&10
	500K bytes packet buffer, 8K MAC table
	Max packet size 1518 bytes (without tag)
	9600 bytes for Jumbo Frame
Flow control	Back pressure for half duplex, IEEE802.3x for full duplex
Management & Security	DB9 console port for out-band management
	SNMP/HTTP/Telnet for in-band management
	Admin IP / Subnet limit
SNMP agent	Version 1, 2c, support MIB II (RFC1213), Bridge MIB (RFC1493)
	VLAN MIB (802.1Q, RFC2674), private MIB
VLAN	802.1Q VLAN with 256 co-current groups maximum from 4094 VLANs
	Port based VLAN, private VLAN
Trunking	Support up to 8 trunks using either static or dynamic trunking (LACP)
QoS	4 priority queues per port for port based & 802.1p tagged based QoS
	Strict priority / WRR scheduling
Spanning Tree	802.1d spanning tree & 802.1w rapid spanning tree
IEEE 802.1x	Support Transparent and authentication modes
	Dynamic VLAN & Guest VLAN are supported
Rate Control	1-31 levels, 128Kbps ~ 30Mbps
Storm control	Broadcast / flooding traffic control
IP Multicast	Support IGMP snooping and query function (256 groups max.)
Software upgrade	Out-band : Xmodem, in-band : TFTP/HTTP
Event log	Support Event log and Syslog
Power supply	Internal power supply : 100~240VAC, 50/60Hz
Environment	Operating temperature : 0 ~ 50C
	Operating humidity : 10% ~ 90% (non condensing)
Dimension	250 x 117 x 37mm
Certification	FCC, CE

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below: